Ключевые слова: LTS, Nb3Sn, accelerator magnets, magnets dipole, quench protection, hot spots, comparison, FCC
Volpini G., Fabbricatore P., Farinon S., Bellomo G., Sorbi M., Stenvall A., Salmi T., Marinozzi V., Caiffi B.
Ключевые слова: FCC, magnets dipole, quench protection, LTS, Nb3Sn, design parameters, heater, design, hot spots
Fabbricatore P., Farinon S., Sorbi M., Toral F., Verweij A., Tommasini D., Auchmann B., Stenvall A., Lorin C., Salmi T., Schoerling D., Durante M., Marinozzi V., Ruuskanen J., Munilla J., Prioli M.
Ключевые слова: FCC, quench protection, design, magnets dipole, LTS, Nb3Sn, quench detection, hot spots, modeling, numerical analysis, temperature distribution
Volpini G., Bottura L., Usoskin A., Goldacker W., Rossi L., Bajko M., Fazilleau P., Stenvall A., Ballarino A., Lorin C., Kario A., Rijk G.d., Bajas H., Perez J.C., Kirby G.A., Durante M., Nugteren J.v., Chiuchiolo A., Benda V., Gentini L., Rijllart A., Mazet J., Broekens K., Canale M., Peray N., Murtomaeki J., Pincot F.
Ключевые слова: accelerator magnets, hot spots, heater, quench protection, modeling, LTS, Nb3Sn, design parameters
Kirby G., Rossi L., Badel A., Bajko M., Ballarino A., Bottura L., Dhalle M., Durante M., Fazilleau P., Fleiter J., Goldacker W., Haro E., Himbele J., Kario A., Langeslag S., Lorin C., Murtzomaki J., Nugteren J., Rijk G., Salmi T., Senatore C., Stenvall A., Tixador P., Usoskin A., Volpini G., Yang Y.*10, Zangenberg N.*11
Tixador P., Bruzek C., Stenvall A., Sirois F., Badel A., Lahtinen V., Escamez G., Ramdane B., Meunier G., Perrin-Bit R.
Ключевые слова: MgB2, wires multifilamentary, ac losses, numerical analysis, modeling, cables
Ferracin P., Felice H., Sabbi G., Todesco E., Stenvall A., Marchevsky M., Cheng D.W., Chlachidze G., Salmi T., Perez J.C., Bermudez S.I., Turqueti M., *2 Ambrosio G.
Ключевые слова: accelerator magnets, heater, geometry effects, design, quench protection, temperature distribution, experimental results
Ключевые слова: measurement setup, cryogenic systems, cryostat, conduction cooled systems, ac losses, magnetization, design, fabrication, test results, MgB2, wires multifilamentary
Bottura L., Goldacker W., Caspi S., Rossi L., Fazilleau P., Fleiter J., Stenvall A., Ballarino A., Lorin C., Marchevsky M., Kario A., Rijk G.d., Perez J.C., Kate H.t., Kirby G.A., Durante M., Lopes M., Haro E., Nugteren J.v., Clement S., Gauthier R., Datskov V., Chouika N., Fajardo L., Gentini L., Lambert L., Rijllart A.
Tixador P., Volpini G., Bottura L., Usoskin A., Yang Y., Goldacker W., Rossi L., Senatore C., Bajko M., Rijk G., Fazilleau P., Fleiter J., Stenvall A., Ballarino A., Lorin C., Kario A., Dhalle M.M., Badel A., Salmi T., Kirby G., Durante M., Zangenberg N., Haro E., Nugteren J.
Ключевые слова: HTS, YBCO, cables, quench propagation, normal zone propagation, numerical analysis, stability, modeling computational, hot spots
Ключевые слова: eddy currents, modeling, numerical analysis, ac losses
Ключевые слова: critical state model, ac losses, numerical analysis, modeling computational, wires round
Ключевые слова: LTS, Nb3Sn, accelerator magnets, high field magnets, quench protection, heater, design parameters, experimental results, modeling
Ключевые слова: HTS, magnets, minimum quench energy, heater, modeling, modeling computational, hot spots, nucleation
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.